|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
BP101P Bypass door floor guide. Screws into the floor to keep bypass doors straight during operation. Adjustable nylon fits doors from 3/4 to 1-3/8 in.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4 to 1-3/8 in thick doors; fits on Harvey. Contents: 1 roller assembly, 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4 to 1-3/4 in thick doors, fits on Acme.
|
Plated steel, includes two brass nails for installation.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
