|
For the weekend woodworker to use on all table and radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. For underpowered saws because requires less power to feed. Negative hook angle makes flat bottom grooves and virtually splinter-free cuts. Anti-kickback design. Resharpenable set produces grooves from 1/4 to 13/16 in, in 1/16 in increments. Includes 2 outside blades, four 2-wing 1/8 in chippers and one 1/16 in chipper, 1/8 in kerf.
|
For table or radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. Cuts dadoes in everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super-smooth dado bottom and the flexibility of an adjustable dado to handle undersized plywood. Anti-kickback design. Eliminated hub, added extra thick and stiff outside plate and gullet designed for max chip ejection to prevent chip build-up within stack. 3/32 in thick chipper for adjusted cut widths in 1/32 in increments, doubles the number of slot widths available and fits plywood 1/32 in undersized from nominal width with less shimming. Shim set included for fine adjustments. Square tooth design, shorter and thicker, reduces drag in cuts and the materials guiding effects; also increases number of sharpening obtainable. Includes four 1/8 in, one 3/32 in and one 1/16 in chipper, 1/8 in kerf.
|
